A.temperature in the space being cooled
B.liquid refrigerant pressure at the solenoid valve
C.pressure drop across the evaporator coils
D.refrigerant gas superheat at the coil outlet
您可能感興趣的試卷
你可能感興趣的試題
A.remains the same
B.is reduced
C.is increased
D.is eliminated
A.corrosion on the gears
B.excessive gear speed
C.dirt in the oil
D.misalignment of the gears
A.maintain alignment when the ship’s hull is working in heavy seas
B.ensure engine vibrations correspond to the natural frequency of the hull
C.permit the engine to expand away from the driven equipment as the engine heats up and expands
D.maintain engine thrust bearing clearances
A.must churn the oil in the sump
B.is connected to the propeller shaft
C.is driven at the highest RPM
D.compensates for alignment variations between the engine and pinion gear
A.reduce load
B.check your exhaust
C.adjust cooling water temperature
D.increase lube oil flow
最新試題
The main purpose of port State control is not to()
Under MARPOL Code the ship to which it applies has to carry ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The ISPS Code consists of a mandatory section-Part A, which shows()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
If separating effect is not good, which measure should be taken ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
To proceed to the assistance of a ship in distress is()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()