A.fuel oil supply temperature is normal
B.burner electrode is incorrectly positioned
C.fuel/air ratio is incorrect
D.ignition current is too low
您可能感興趣的試卷
你可能感興趣的試題
A.when the boiler has been secured long enough for most solids to settle
B.when the boiler has been cooled to ambient temperature
C.only after raising the water level to within 0~5 inch of the high water cutout only
D.after bypassing the low pressure
A.completely drain the boiler in an emergency
B.prevent sludge from forming in the drum
C.remove floating impurities from the boiler water surface
D.remove settled solids from the water drum
A.defective solenoid valve
B.dirty fuel nozzle
C.grounded high tension lead
D.faulty ignition cable connector
A.excessive purging before lighting off
B.insufficient trail for ignition period
C.a faulty transformer in the ignition circuit
D.insufficient purging before lighting off
A.prevent engine back pressure at heavy loads
B.increase total engine efficiency at low loads
C.prevent boiler corrosion at low engine loads
D.improve engine fuel consumption at any load
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Cold weather starting of a diesel engine may be made easier by()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Which of the following items don’t belong to dock repair works?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
If separating effect is not good, which measure should be taken ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()