A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
您可能感興趣的試卷
你可能感興趣的試題
Which series of commands will configure router R1 for LAN-to-LAN communication with router R2? The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP.()
A.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.129 255.255.255.192;R1(config-if)# no shutdown
B.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.97 255.255.255.192;R1(config-if)# no shutdown
C.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.4 255.255.255.252;R1(config-if)# clock rate 56000
D.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.6 255.255.255.252;R1(config-if)# no shutdown
E.R1(config)# router rip;R1(config-router)# network 192.1.1.4;R1(config-router)# network 192.1.1.128
F.R1(config)# router rip;R1(config-router)# version 2;R1(config-router)# network 192.1.1.0
請參見圖示。當收到下列幀將會怎么做?()
A.Router1的將剝離的源MAC地址,并將其與MAC地址0000.0c36.6965取代。
B.Router1的將剝離的源IP地址,并將其與IP地址192.168.40.1取代。
C.router1將剝離的目的MAC地址,并將其與MAC地址代替0000.0c07.4320。
D.router1將剝離的目的IP地址,并將其與192.168.40.1的IP地址替換。
E.Router1的將轉發數據包輸出接口的FastEthernet0/1。
F.router1將轉發數據包輸出接口的FastEthernet0/2。
A.4to6 routing
B.6to4 routing
C.binary routing
D.dual-stack routing
E.NextGen routing
A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates
A.A dynamically learned MAC address is saved in the startup-configuration file.
B.A dynamically learned MAC address is saved in the running-configuration file.
C.A dynamically learned MAC address is saved in the VLAN database.
D.Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
E.Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.
最新試題
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
要將數據包發送到遠程網絡,應使用哪種設備?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()