A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
您可能感興趣的試卷
你可能感興趣的試題
A.172.22.243.127
B.172.22.243.191
C.172.22.243.190
D.10.16.33.98
E.10.17.64.34
F.192.168.1.160
請參見圖示。哪三種說法正確描述了網絡設備A?()
A.使用255.255.255.128子網掩碼時,在各接口不需要的IP地址。
B.使用255.255.255.128子網掩碼時,在各接口確實需要一個唯一的IP地址IP子網。
C.為255.255.255.0的子網掩碼時,必須是一個二層設備的電腦進行通信彼此。
D.為255.255.255.0的子網掩碼時,必須是一個三層設備的電腦進行通信彼此。
E.使用255.255.254.0的子網掩碼時,每個接口并不需要一個IP地址。
A.6to4 tunneling
B.VPN tunneling
C.GRE tunneling
D.ISATAP tunneling
E.PPP tunneling
F.Teredo tunneling
A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
Which series of commands will configure router R1 for LAN-to-LAN communication with router R2? The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP.()
A.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.129 255.255.255.192;R1(config-if)# no shutdown
B.R1(config)# interface ethernet 0;R1(config-if)# ip address 192.1.1.97 255.255.255.192;R1(config-if)# no shutdown
C.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.4 255.255.255.252;R1(config-if)# clock rate 56000
D.R1(config)# interface serial 0;R1(config-if)# ip address 192.1.1.6 255.255.255.252;R1(config-if)# no shutdown
E.R1(config)# router rip;R1(config-router)# network 192.1.1.4;R1(config-router)# network 192.1.1.128
F.R1(config)# router rip;R1(config-router)# version 2;R1(config-router)# network 192.1.1.0
最新試題
OSI 模型的哪兩項功能在第2層實現?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
何時必須使用clock rate 命令配置路由器串行接口?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()