Refer to the exhibit.From the MAC addresses shown in the command output,to which two ports is the multicast stream 225.230.57.199 being forwarded on this switch?()
A.Fa6/28
B.Fa7/20
C.Gi3/7
D.Fa4/2
E.Fa4/14
F.Fa4/38
G.Fa6/38
H.Fa5/7
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. When applying this hierarchical policy map on the on the tunnel1 interface, you measure high jitter for traffic going through class 1234. What is the most likely cause of this jitter?()
A.The configuration of a hierarchical policy map on a tunnel interface is not supported.
B.Class 5555 and class 5554 are both taking up 100% of the bandwidth,leaving nothing for class 1234.
C.The burst size for the traffic shaping is wrongly configured to 15000;this would require an interface capable of sending at 150Mb/s.
D.The burst size for the traffic shaping has been wrongly configured;it should be set as low as possible.
E.The burst size for the traffic shaping has been wrongly configured;it should be set as high as possible.
A.data marked with DSCP AF21,VOIP marked with DSCP EF
B.data marked with DSCP AF51,VOIP marked with DSCP EF
C.data marked with the DE-bit,VOIP marked with the CLP-bit
D.data marked with DSCP EF,VOIP marked with DSCP AF31
E.data marked with IP precedence 5 VOIP marked with DSCP EF
A.mark VOIP traffic with IP precedence 6 and configure only ’fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the QoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VoIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
最新試題
What is the three main step of using the QoS feature with MQC command line interface?
Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?()
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
當將多個交換機加入到MST region當中會發(fā)生什么(what happen)?
Refer to the exhibit.Which statement describes DLCI 17?()
DHCP SERVER在給一個網(wǎng)段設置POOL時,該網(wǎng)段路由器接口地址能不能放入POOL,能why,不能why。
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
Refer to the exhibit.How many broadcast domains exist in theexhibited topology?()
問一個怎么樣的屬性,能讓路由不通告給任何的peer?
What is method list for configure aaa?