A.during low loads
B.after proper oil viscosity is reached
C.during starting
D.after cleaning filters
您可能感興趣的試卷
你可能感興趣的試題
A.adjusts the idle speed control
B.drain and flushes the governor and replace the oil
C.adjusts the compensating needle valve
A.Proper timing
B.Accurate metering
C.Suitable injection rate
D.Suitable atomization rate
A.sluggish response
B.speed droop variations
C.isochronous governing
D.sensitivity increase
A.speed will drop drastically with any increase in load
B.will stop due to zero fuel supply
C.will stall upon application of load
D.speed will remain fairly constant despite load changes
A.the sump oil level
B.oil flow sight glasses
C.bearing temperatures
D.all of the above
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
Using a file without a handle may result in （）
Which of the following items don’t belong to dock repair works?（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Under MARPOL Code the ship to which it applies has to carry （）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）