A.the water produced during combustion
B.the sulfur in the fuel
C.unburned fuel oil
D.all of the above
您可能感興趣的試卷
你可能感興趣的試題
A.early injection timing
B.worn orifices in the injection nozzles
C.worn or scored cylinder liners
D.using a fuel with too low of a cetane number
A.during the valve overlap period
B.with only the exhaust valve open
C.at a pressure below atmospheric
D.without cooling the cylinders or pistons
A.excessive piston to liner clearance
B.excessive dirt beneath the piston crown that reduces heat transfer
C.faulty nozzle spray
D.all of the above
A.an increased flash point
B.higher lube oil pressures
C.an increased viscosity
D.lower lube oil pressures
A.The fuel metering will vary
B.The fuel will explode
C.The cylinder head will crack
D.The engine will stop
最新試題
Using a file without a handle may result in ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
If separating effect is not good, which measure should be taken ()
The main purpose of port State control is not to()
The ISPS Code consists of a mandatory section-Part A, which shows()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Under MARPOL Code the ship to which it applies has to carry ()
The treatment of the fuel oils involves storage, heating, filtering and()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Diesel engine air start system check valves are opened by ()