A.excessively late injection timing for each cylinder
B.incorrectly adjusted intake valve timing
C.incorrectly adjusted fuel injector
D.incorrectly adjusted intake valve clearance
您可能感興趣的試卷
你可能感興趣的試題
A.Internally finned liner
B.Externally finned liner
C.Wet liner
D.Integral water-jacket liner
A.the water produced during combustion
B.the sulfur in the fuel
C.unburned fuel oil
D.all of the above
A.early injection timing
B.worn orifices in the injection nozzles
C.worn or scored cylinder liners
D.using a fuel with too low of a cetane number
A.during the valve overlap period
B.with only the exhaust valve open
C.at a pressure below atmospheric
D.without cooling the cylinders or pistons
A.excessive piston to liner clearance
B.excessive dirt beneath the piston crown that reduces heat transfer
C.faulty nozzle spray
D.all of the above
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
Using a file without a handle may result in （）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
If separating effect is not good, which measure should be taken （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
The treatment of the fuel oils involves storage, heating, filtering and（）
The shipboard oil pollution emergency plan will be invalid after （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Diesel engine air start system check valves are opened by （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish