A.temperature of the exhaust gases
B.energy supplied to the turbocharger
C.air pressure to the intake manifold
D.purge of exhausted gases from the cylinders
您可能感興趣的試卷
你可能感興趣的試題
A.increase in engine speed
B.increase in cylinder turbulence
C.leaking needle valve
D.reduction in cylinder turbulence
A.check the air filter for dirt
B.check for an exhaust leak
C.check the cooling water temperature
D.notify the bridge that you are going to shut the engine down
A.formation of carbon on the intake and exhaust ports
B.high water jacket temperatures
C.overheated pistons and cylinders
D.an increase in lube oil viscosity due to fuel dilution
A.produce a scavenging effect in the combustion space
B.equalize cylinder and exhaust manifold pressures
C.alleviate the difference in valve size between the intake and exhaust
D.flush out condensate that collects after each compression stroke
A.high exhaust temperature and low firing pressure
B.high exhaust temperature and high firing pressure
C.low exhaust temperature and low firing pressure
D.low exhaust temperature and high firing pressure
最新試題
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
If separating effect is not good, which measure should be taken ()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The shipboard oil pollution emergency plan will be invalid after ()
() is not installed on the main switchboar.
Diesel engine air start system check valves are opened by ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
The cetane rating of diesel fuel is an indication of the ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()