A.in motion, providing a null input
B.not in motion, thus providing a null input
C.in motion, providing an input to place the main pump on maximum stroke
D.in motion, providing an input to place the main pump at null stroke
您可能感興趣的試卷
你可能感興趣的試題
A.regulating the ratio between torque and speed via the torque limiter at the motor
B.directing the motor output flow through a bypass line
C.maintaining a constant flow and pressure input
D.controlling the input flow rate
A.the temperature of the hydraulic fluid
B.the flow rate of the hydraulic fluid
C.the temperature of the cooling water
D.all of the above
A.regulate the fluid flow in either direction
B.restrict movement of hydraulic fluid in one direction, but allow free movement in the other direction
C.allow free movement of hydraulic fluid in both directions
D.allow a restricted fluid flow in one direction only
A.adding small amounts of oil to the system
B.the system has been overheated
C.the system has been drained and then filled with new oil
D.the system has been idle for a long period of time
A.permanent loss of pump suction
B.worn shaft seals
C.high level in the oil sump
D.low motor RPM
最新試題
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The cetane rating of diesel fuel is an indication of the （）
The treatment of the fuel oils involves storage, heating, filtering and（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
If separating effect is not good, which measure should be taken （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）