A.Oil inlet valve opening too quickly
B.Oil temperature too high
C.Diameter of gravity disc too small
D.Viscosity of oil too low
您可能感興趣的試卷
你可能感興趣的試題
A.cut off the power
B.cut off the oil inlet
C.open guide water valve
D.close oil outlet value
A.acid
B.sludge
C.mechanical impurity
D.salinity
A.too little seal water
B.improper gravity disc
C.oil discharging pump not working very well
D.low water level of the working water
A.100%
B.80%
C.1/2
D.1/3
A.100%
B.1/2
C.1/5
D.1/3
最新試題
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Under MARPOL Code the ship to which it applies has to carry ()
The shipboard oil pollution emergency plan will be invalid after ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
The condensers located in various stages of a flash evaporator are cooled by()
Cold weather starting of a diesel engine may be made easier by()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()