A.drained into the vessels bilges
B.reclaimed for other uses
C.held in a slop tank
D.purified and then reused
您可能感興趣的試卷
你可能感興趣的試題
A.when the remaining charge volume is less than 90 percent of the required VOLUME
B.at each inspection for certification
C.at each annual inspection
D.when the weight loss exceeds 10% of weight of charge
A.welding brackets across both ends of the crack
B.chipping out and slot welding the entire crack
C.drilling a hole at each end of the crack
D.cutting a square notch at each end of the crack
A.breaking the fire chemical chain reaction
B.smothering
C.cooling
D.isolating the heat from the fuel
A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
最新試題
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The treatment of the fuel oils involves storage, heating, filtering and()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
The condensers located in various stages of a flash evaporator are cooled by()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Which of the following items don’t belong to dock repair works?()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The main purpose of port State control is not to()