A.breaking the fire chemical chain reaction
B.smothering
C.cooling
D.isolating the heat from the fuel
您可能感興趣的試卷
你可能感興趣的試題
A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
A.The pressure-vacuum relief valve should be reset
B.The tanks should be made seaworthy to prevent contamination
C.The tanks should be sounded to make sure the levels are not rising
D.The tanks should be marked with a bull stamp on the manifold filling valve
A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
最新試題
（） is not installed on the main switchboar.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
The condensers located in various stages of a flash evaporator are cooled by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
To proceed to the assistance of a ship in distress is（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）