A dirty fuel oil filter is can be detected by （）
Ⅰ.fuel oil analysis
Ⅱ.observing the pressure drop across the filter
A.Ⅰonly
B.Ⅱonly
C.eitherⅠorⅡ
D.neitherⅠnor
您可能感興趣的試卷
你可能感興趣的試題
A.increase the density of the intake air
B.decrease turbocharger power usage
C.reduce exhaust gas temperature
D.compensate for turbocharger PRM fluctuations
A.high oil pressure
B.excessive bearing end play
C.plugged oil control rings
D.engine overload
A.leaking delivery valve
B.excessive bearing end play
C.plugged injector spray hole
D.increased plunger stroke
A.graphite packing
B.sealing compound
C.lubricating oil
D.gaskets
A.Decrease the air density
B.Increase the exhaust temperature
C.Decrease the lube oil temperature
D.Increase the air density
最新試題
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
（） is not installed on the main switchboar.
The main purpose of port State control is not to（）
If separating effect is not good, which measure should be taken （）
The treatment of the fuel oils involves storage, heating, filtering and（）